F065
Diametro nominale del tubo esterno:
- Raccomandato dallo standard aziendale HL per le apparecchiature criogeniche. Può essere prodotto anche in base alle esigenze del cliente.
- Pressione di progetto:
- Pressione consigliata ≤ 16 bar. In alternativa, selezionare il tipo di connessione saldata (≤ 40 bar).
- Materiale del tubo esterno
In assenza di requisiti specifici, il materiale del tubo interno e del tubo esterno saranno gli stessi.
3.1.3 Tipo di connessione saldata
modello
Connessione
Tipo
Diametro nominale del tubo interno
Pressione di progettazione
Materiale
del tubo interno
Standard
Osservazione
W010
00X
Tipo di connessione saldata per tubo flessibile con isolamento sottovuoto statico
DN10, 3/8"
8~40 bar
Acciaio inossidabile serie 300
ASME B31.3
| V | DN20, 3/4" | DN25, 1" | Diametro nominale del tubo esterno: | |
| Pressione di progettazione | Materiale del tubo interno. | A è 304, | DN40, 1-1/2" | C è 316, |
| D è 316L, | HLHS | HLHS | W015 | 00X |
| DN15, 1/2" | No | No | HLHS | Pressione di progettazione |
| Nominal Diameter of Inner Pipe | 00X | HLHS | W025 | 00X |
| Design Pressure | HLHS | DN32, 1-1/4" | 00X | DN32, 1-1/4" |
| HLHS | HLHS | HLHS | DN40, 1-1/2" | HLHS |
| Si consiglia ≤ DN25 o 1". Oppure selezionare il tipo di connessione a baionetta per vuoto con flange e bulloni (da DN10, 3/8" a DN80, 3"), tipo di connessione saldata (da DN10, 3/8" a DN150, 6") | 00X | |||
| DN50, 2" | HLHS | |||
| Material | 300 Series Stainless Steel | |||
| Standard | LN2HLHS2W080 | |||
00X
DN80, 3"
| LHSW100 | |
| 00X | |
| DN100, 4" |  |
LHSW125
| 00X | DN125, 5" | LHSW150 | 00X | DN150, 6" | Diametro nominale del tubo esterno: |
| Raccomandato dallo standard aziendale HL per le apparecchiature criogeniche. Può essere prodotto anche in base alle esigenze del cliente. | Materiale del tubo esterno | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" |
| Tipo | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Standard | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| DN10, 3/8" | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Pressione di progetto. | / | DN25, 1" | DN25, 1" | / | |
| Materiale del tubo interno. | / | DN25, 1" | DN25, 1" | / | |
| C è 316, | / | DN25, 1" | DN25, 1" | / | |
| HLHS | / | DN25, 1" | DN25, 1" | / | |
| DN15, 1/2" | / | DN25, 1" | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / | |
| HLHS | / | / | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / |
Diametro nominale del tubo interno:
| Si consiglia ≤ DN25 o 1". Oppure selezionare il tipo di connessione a baionetta per vuoto con flange e bulloni (da DN10, 3/8" a DN80, 3"), tipo di connessione saldata (da DN10, 3/8" a DN150, 6") | Diametro nominale del tubo esterno: |
| Raccomandato dallo standard aziendale HL per le apparecchiature criogeniche. Può essere prodotto anche in base alle esigenze del cliente. | Pressione di progetto: |
| Pressione consigliata ≤ 16 bar. In alternativa, selezionare il tipo di connessione saldata (≤ 40 bar). | Materiale del tubo esternoIn assenza di requisiti specifici, il materiale del tubo interno e del tubo esterno saranno gli stessi.3.2 Sistema di tubazioni dinamico con isolamento sottovuoto3/S |
| 3.2.1 Attacco a baionetta per vuoto con morsetti | modello |
| Connessione | Tipo |
| Diametro nominale del tubo interno | Pressione di progettazione |
| Materiale | del tubo interno |
| Standard | Osservazione |
HDB01008
Attacco a baionetta per vuoto con fascette per tubo flessibile isolato sottovuoto dinamico
lDN10, 3/8"
l8 bar
| Acciaio inossidabile serie 300 C è 316, | Materiale del tubo interno. | |
| A è 304, | B è 304L,C è 316,D è 316L, | |
| E sta per altro. | HLH | DB01508 |
| DN15, 1/2" | Pressione di progetto: | Pressione di progetto: |
| DN20, 3/4" | Pressione di progetto: | Pressione di progetto: |
| DN25, 1" | Pressione di progetto: | Pressione di progetto: |
| Diametro nominale del tubo esterno: | Pressione di progetto: | Pressione di progetto: |
Pressione consigliata ≤ 8 bar. In alternativa, selezionare il tipo di connessione a baionetta per vuoto con flange e bulloni (≤ 16 bar) o il tipo di connessione saldata (≤ 40 bar).Materiale del tubo esternoIn assenza di requisiti specifici, il materiale del tubo interno e del tubo esterno saranno gli stessi.
Condizioni di alimentazione:
HL-HX-X-Il sito deve fornire energia alle pompe per il vuoto e comunicare a HL Cryogenic Equipment le informazioni locali sulla rete elettrica (tensione e frequenza).-00-X
3.2.2 Attacco a baionetta per vuoto con flange e bulloni
modello
Connessione
Tipo
Diametro nominale del tubo interno
Pressione di progettazione
Materiale
del tubo interno
Standard
Osservazione
Nominal Diameter of Inner Pipe
00X
8~16 bar
DN10, 3/8"
8~16 bar
Acciaio inossidabile serie 300
Design Pressure
Pressione di progetto.
08 è 8 bar,
16 corrisponde a 16 bar.
Materiale del tubo interno.
A è 304,
B è 304L,
C è 316,
D è 316L,
E sta per altro.
F015
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | Serie di separatori di fase isolati sottovuoto | DN10, 3/8" | armeno
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| franceseDiametro nominale del tubo esterno:X | DN15, 1/2" | |||||
| francesePressione consigliata ≤ 16 bar. In alternativa, selezionare il tipo di connessione saldata (≤ 40 bar).X | DN20, 3/4" | |||||
| franceseCondizioni di alimentazione:X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: islandese
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| francese08 è 8 bar,00X | e 25, 32, 40. | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| franceseSamoano00X | DN15, 1/2" | |||||
| franceseSindhi00X | DN20, 3/4" | |||||
| franceseTagiko00X | DN25, 1" | |||||
| francesetailandese00X | DN32, 1-1/4" | |||||
| franceseUzbeko00X | DN40, 1-1/2" | |||||
| franceseXhosa00X | DN50, 2" | |||||
| franceseZulu00X | DN65, 2-1/2" | |||||
| franceseOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Condizioni di alimentazione:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10, 3/8" | DN10, 3/8" | Acciaio inossidabile serie 300 | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| franceseDN15, 1/2"00X | DN15, 1/2" | |||||
| franceseDN20, 3/4"00X | DN20, 3/4" | |||||
| franceseDN25, 1"00X | DN25, 1" | |||||
| franceseW03200X | DN32, 1-1/4" | |||||
| franceseW04000X | DN40, 1-1/2" | |||||
| franceseW05000X | DN50, 2" | |||||
| franceseW06500X | DN65, 2-1/2" | |||||
| franceseW08000X | DN80, 3" | |||||
| HTubo flessibile per giacca a vuoto00X | DN100, 4" | |||||
| HValvola di regolazione del flusso di ossigeno liquido cinese00X | DN125, 5" | |||||
| HPrezzo all'ingrosso Cina Serbatoio standard ISO Cina 2...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSSistema di pompa a vuoto dinamico00X | Serie di separatori di fase isolati sottovuoto | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| franceseWhatsApp00X | DN15, 1/2" | |||||
| franceseWeChat00X | DN20, 3/4" | |||||
| francesetedesco00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: greco
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
danese
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLLaoX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | armeno
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHestoneX | DN15, 1/2" | |||||
| HLHFrisoneX | DN20, 3/4" | |||||
| HLHGujaratiX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: islandese
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLMalayalam00X | Maori | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDSamoano00X | DN15, 1/2" | |||||
| HLHDSindhi00X | DN20, 3/4" | |||||
| HLHDTagiko00X | DN25, 1" | |||||
| HLHDtailandese00X | DN32, 1-1/4" | |||||
| HLHDUzbeko00X | DN40, 1-1/2" | |||||
| HLHDXhosa00X | DN50, 2" | |||||
| HLHDZulu00X | DN65, 2-1/2" | |||||
| HLHDOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
